Detailed description:
The water bottle filling machine is used to produce polyester
bottled mineral water, purified water, alcoholic beverage machinery
and other non-gas beverage machinery. It adopts bottle neck holding
transmission technology to realize fully automatic rinsing,filling
and capping.Most elements of electrical system employ foreign
advanced products.Each machine element that contacts with the
liquid is made of high quality stainless steel.They obtain the
advantages of good abrasive resistance,high stability,low failure
rate,etc.The quality of the equipments reaches the international
advanced level.
Technical parameter
| Model | CGF24-24-8 |
| Production capacity(500ml)(b/h) | 8000-10000 |
| Filling precision | ≤±5MM(Liquid Level) |
| Polyester bottle standard(mm) | Bottle diameter40-80; |
| Height | Height:130-280 |
| Suitable cap shape | Plastic Screw Cap |
| Water pressure of Washing bottle(MPa) | 0.18 |
| Water consumption for Water bottle (kg/h) | 800 |
| Spraying position | 6 |
| Dripping bottle position | 3.5 |
| Gas source pressure(Mpa) | normal pressure |
| Gas consumption(m3/mm) | 0.4 |
| Total power | 6.57 |
| Total weight | 5500 |
| Dimension(L*W*H) | 2750*2180*2200mm |
Washing part
1) The rotary wheel is a fully AISI304 stainless steel welded
structure.
2) This bottle clamp grips bottle at neck position, avoiding bottle
mouth thread contamination caused by rubber gripper block of a
traditional bottle clamp. Made of AISI304 stainless steel, this
bottle clamp is hygienic and durable.
3) The high efficiency atomizing spray nozzle installed on bottle
clamp incorporating technology from Spaying Systems Co. Ltd., is
capable of cleaning any part of bottle inner wall, and also saves
rinsing water
4) Covering of bottle clamps and elevator are product of IGUS
5) The rinse is driven by driving system positioned inside machine
frame via gear transmission.
Filling part
1) The filler is designed and manufactured with application of
Italy technology, providing hardware guarantee for securing product
quality and reducing loss.
2) Rotary wheel are fully made of stainless steel AISI304.
3) Filling valves are designed and manufactured with German
technology, made of AISI316L, featuring high filling accuracy and
high filling speed.
4) Bottles are raised and lowered by cam controlled lifting
cylinder. Valve opening mechanism is actuated by air cylinder.
5) All sliding bushes of lifting device use Igus (Germany)
anti-corrosion maintenance free bearing.
6) Hydraulic pump is float-ball controlled.
7) The filler is driven by driving system positioned inside machine
frame via gear transmission
Capping part
1) The capper is most precise part in 3 in 1 filling machine,
because the quality of machine is important to running credibility
and product quality.
2) The cover track has the device to prevent the reversal cover
from passing and pick out the reversal cover. Meanwhile the
photoelectric switch can stop the machine automatically when there
is no cover on the track, by which it can avoid bottle without
cover effectively.
3) It also has the bottle check-up switch. Together with cylinder
on the joint of the cover track and cover lift, they can control
the cover flow and stop it in case no bottle to reduce the quantity
of cover.
4) Highly effective acentric way for cap sorting to reduce the
abrasion.
5) It has the check-up device to control the cover lift.
