Rotary Filling And Sealing Machine , Automatic Can Filling Machine
For Juice Beverage
Working principle:
The machine adopts the principle of normal pressure filling. When
the empty can enters the lifting tray through the wheel puller, the
filling valve and the empty cans are aligned, the empty tank is
lifted and sealed, and the valve port of the filling valve is
opened automatically.Stop filling when the filling liquid level
blocks the gas return pipe orifice of the valve.The filled can is
sent to the sealing machine head through the hook chain, and the
cover is sent to the can mouth through the cap feeder. When the can
supporting mechanism is raised, the pressure head presses the can
mouth, and the sealing wheel is pre sealed and sealed. After the
jar is sealed, it is pushed out by the can beating mechanism to
complete the filling and sealing process.
Technical parameter
| Model | GF12-4 |
| Capacity (can/Hour) | 4000-6000CPH |
Can diameter: | 54.9mm; 57.5mm |
Can height: | 134mm; 168mm |
| Heads of filling | 12 |
| Heads of sealing | 4 |
Compressed air: | 0.4-0.8m |
flow rate: | 0.16m3/min |
Power | 7.5KW |
Dimension | 2900X1500X2000mm |
Weight | 4000Kg |
Attention Points:
1. Installation location: horizontal without vibration
2. The equipment shell must be connected with safe and reliable
protective ground wire
3. Keep away from or shield large interference
4. When the equipment is working, it should be in the purification
workshop
5. Do not hit or press heavily
6. Before and after operation, check whether the screws in each
part of the equipment are loose
7. The power supply of the machine must be cut off when repairing
and cleaning the machine
8. When the electrical part fails, it is forbidden to repair it by
non professional person
9. When the machine is running, People is forbidden to be close to
the machine
10. When using compressed air, the air source must be stable and
not less than 0.4MPa
