Soft Drink Bottling Plant, Carbonated Soft Drink
Making Machine, PLC Control
INSTRUCTION
This machine is for CSD drink production, it integrates rinser
filler capper three functions in one unit,capacity is about
10000-12000BPH(500ml).
Washing Part
1) PET bottle running into the washing part by dividing starwheel,
the bottle clamped by the clamp and the flip device and rotating to
the bottle down, sterilizing water rinsing and drain. And then auto
rotating to the bottle up, delivered to the filling part by the
bottle out starwheel.
2) Main material and part contact with liquid all made of SUS304.
3) Open gear transmission.
4) Complete SUS304 clamp, easy to adjust; Less contact with the
bottle area, effective to avoid the secondary pollution of bottle.
5) The washing equipped with the water drain pan to collect the
rinsing water.
6) Rinsing consumption: 105ml/s per bottle (0.25Mpa).
Filling Part
Filling machine is the introduction of German technology in our
country, use the isobaric filling principle to design and
manufacture.
1) The filling valve uses pressure type mechanical valve, filling
fast and sensitive, high precision.
2) Filling system use the block bottleneck entering technology,
avoiding the bottle-mouth second pollution.
3) The main drive adopts gear drive which is open type composite
transmission, high efficiency and lower noise.
4) Adopt inverter to control the machine's main motor speed,
stepless frequency control of motor speed.
5) The machine adopts PLC automatic control, the online fault
display, such as blocking bottles, such as lack of cover.
Capping Part
1) Magnetic constant torque screw capping machine, Screw cap effect
is stable and reliable. Block defect rate ≤0.2% .
2) The cap unscrambler equipped with wrong cover device, if the cap
is not in correct condition it will back to the unscrambler
automaticly.
3) The cap unscrambler with sensor, it will automaticly feeding
when there is no caps, and it will stop when the caps are full.
Besides this DCGF32-32-10, We also have other capacity
| Model | DCGF16-12-6 | DCGF18-18-6 | DCGF24-24-8 | DCGF32-32-10 | DCGF40-40-12 | DCGF50-50-15 |
| Number of rising heads | 16 | 18 | 24 | 32 | 40 | 50 |
| Number of filling heads | 12 | 18 | 24 | 32 | 40 | 50 |
| Number of capping heads | 6 | 6 | 8 | 10 | 12 | 15 |
| Bottle standard(mm) | Diameter:Φ50-Φ108 Height:150-320 |
| Rated production capacity(500ml) | 2000BPH | 4000BPH | 7000BPH | 8000BPH | 10000BPH | 12000BPH |
| Installed capacity(KW) | 3.8 | 4.3 | 6.5 | 8.7 | 9.5 | 12 |
